MX running 10.0 (DPCE-R-20GE-2XGE for int in question) Should I expect that a logical unit configured with 'vlan-tags outer 0x88A8.100' would also permit frames using TPID 8100 and VLAN ID 100 ? I kinda expected not (since it doesn't 'match'), yet if I change my test set to send normal 0x8100.100 frames, they're still accepted by the interface (config below) and stuffed into the associated VPN.
[edit interfaces ge-1/1/0] flexible-vlan-tagging; encapsulation flexible-ethernet-services; gig-ether-options { no-auto-negotiation; ethernet-switch-profile { tag-protocol-id 0x88A8; } } unit 100 { encapsulation vlan-ccc; vlan-tags outer 0x88A8.100; input-vlan-map pop; output-vlan-map push; } Are my expectations that "specifying the TPID in the vlan-tags statement would ONLY match frames with that TPID" wrong? Practice would indicate that I'm wrong, but I guess I'm wondering if this is expected behaviour. TIA, David _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp