On 10/13/11 12:21 , Richard A Steenbergen wrote: > On Thu, Oct 13, 2011 at 02:19:40PM +0200, Michele Bergonzoni wrote: >> Il 13/10/2011 13.31, Chen Jiang ha scritto: >>> AFAIK, The EX8200 use SRAM for FIB and TCAM for ACL, that's not like >>> EX2200/3200/4200 that use TCAM for all FIB and ACL. >> >>> You could vty to line card and try this knob and see what happened: >>> PFEM2(vty)# show shim route lpm-dmm-stats >> >> Not sure to understand how something can switch data at that speed using >> SRAM as a FIB, but it's consistent with my TCAM appearing almost empty.
sram or rl-dram works just fine as fib, and it has way lower power requirements in general. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp