You can find the details on the juniper website. Off the top of my head I know there are fewer queues and you can't do layer-2 and layer-3 services on the same blade. There's a DPC-S that is layer 2 only. In general you should consider the non-e legacy. I believe they might even be end of life by now. The DPC-E's are eventually going to be superseded by the MPC because of the trio chipsets, but there will be several years before they are dropped, if ever.
2011/12/12 Nicolaj Kamensek <n...@accelerated.de> > Hello list, > > can anyone name the major differences between those modules? DPC are > becoming available in the used market for small money and I am wondering if > a DPC non-E is good enough for a classical access router environment with > 30.000+ ARP entries and a growing number of IPv6 neighbours but nothing > fancy overall. > Since it's hard to find any facts about this: > > - does it matter memory-wise if the requirements above are applied to just > one routed port or to multiple switched/routed ports? > - do bundled links still double the amount of memory required? > > > Thanks! > ______________________________**_________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/**mailman/listinfo/juniper-nsp<https://puck.nether.net/mailman/listinfo/juniper-nsp> > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp