Hi Amos, I'm not sure I completely understand what you're trying to accomplish. Could you give us an example topology diagram?
Thanks, --Stacy On Feb 4, 2012, at 1:20 PM, Amos Rosenboim wrote: > Hi All, > > I have a router with two VRFs. > I need to apply FBF on traffic flowing between the two VRFs so I created a > logical tunnel that connects the two VRFs. > The problem is that when importing routes from one VRF to the other the next > hop is obviously not through the tunnel. > I am trying to apply an import map that will change the next-hop of imported > routes to the tunnel interface, but it doesn't work (traffic still bypasses > the tunnel). > > I can obviously skip the VRF import method and simply run BGP over the > tunnels but I would like to avoid this as it forces me to use route refection > (the routes I need to announce are learnt via iBGP) and so on. > Any ideas how to achieve the goal of sharing routes between the VRFs but > controlling the next hop in each VRF differently ? > > Regards > > Amos > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp