As far as I remember you have to explicitly select 10g or 1g mode on PIC level for EX uplink module. This automatically rules out any mixed mode setup.
NK 2012/2/21 Timh Bergström <timh.bergst...@videoplaza.com> > On Tue, Feb 21, 2012 at 12:03 PM, Mike Williams > <mike.willi...@comodo.com> wrote: > > On Tuesday 21 February 2012 08:33:53 Jeff Wheeler wrote: > > > > The built in uplink ports in the EX3300. Do they support running 2 at > 10Gb > > (for VC) and 2 at 1Gb for regular ethernet? > > I'm sure I've seen it written that all four ports can be used at 10Gb, > if true > > that would support my belief mixed mode operation is supported too. > > Afaik two of the four 10Gb ports are pre-configured for VC, the other > two can be used for ethernet out of the box, or you can use one for VC > and three for ethernet or the other way round, no problems (at least > that's what the juniper SE told me when I bought mine). > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
