On Tuesday 21 February 2012 14:44:19 Timh Bergström wrote: > > Hope nobody minds me butting in here, but this brings up a related > > question for me. > > > > The built in uplink ports in the EX3300. Do they support running 2 at > > 10Gb (for VC) and 2 at 1Gb for regular ethernet? > > I'm sure I've seen it written that all four ports can be used at 10Gb, if > > true that would support my belief mixed mode operation is supported too. > > Afaik two of the four 10Gb ports are pre-configured for VC, the other > two can be used for ethernet out of the box, or you can use one for VC > and three for ethernet or the other way round, no problems (at least > that's what the juniper SE told me when I bought mine).
We got our stack of EX3300s yesterday. I can confirm that (with 11.4R2.14 at least) you can do mixed 1/10GbE on the EX3300. I've got 3 in a VC ring of 10Gb using ports 2 and 3, 10GbE in port 0, and 1GbE in port 1. Didn't have to do anything special either, although I did tell the VC to use ports 2 and 3 which was probably unnecessary. 1GbE SFPs cause a ge-x/1/x interface to appear, and 10GbE SFPs cause an xe-x/1/x interface to appear. -- Mike Williams Senior Infrastructure Architect Comodo CA Ltd Office Tel Europe: +44 (0) 161 8747070 Fax Europe: +44 (0) 161 8771767 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp