James,
I rack mounted 6 EX4200s w/ dual ps in a VC config with just the ears.
They do sag. about half inch. Those ears and screws are strong!
Just a preference thing, they are still standing 3 years later.
Mike Azevedo
On 3/20/2012 5:38 PM, James Baker wrote:
Yeah I had a thought about that, however they are quite pricey
Thanks anyway
-----Original Message-----
From: Patrick Dickey [mailto:patrick.dic...@virtualarmor.com]
Sent: Wednesday, 21 March 2012 11:26 a.m.
To: James Baker; juniper-nsp@puck.nether.net
Subject: RE: [j-nsp] Rack mounting a EX4200-48PX, concerned about weight
James-
I would suggest using the 4 post rack mounts for the EX4200. Juniper has them
on the price list. They do sag a little too much for my taste as well, and with
the bigger PSUs... yikes!
I've seen them after a year on a 2 post stock mount and they were fine
physically, though.
HTH
Patrick
-----Original Message-----
From: juniper-nsp-boun...@puck.nether.net
[mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of James Baker
Sent: Tuesday, March 20, 2012 4:20 PM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] Rack mounting a EX4200-48PX, concerned about weight
I've got a couple of new EX4200-48PX with dual 930W power supply which have
just arrived and I'm quite concerned about the weight of the units in relation
to the rack ears. It is the same ears for the EX4200/3200 family.
Has anyone racked these before, if so how much sag do you get and do you
suggest a shelve underneath?
I've seen what a Cisco2811 does and how much it sags and this will be a lot
worse.
Thanks
James
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp