2012/4/4 Jeff Wheeler <j...@inconcepts.biz>: > I just got an MX80 that won't boot 10.4 software. Like you, I did not > want to upgrade to newer software yet, as my existing MX80s are all > running 10.4R4.5 and we are satisfied with it. > > FYI my Midplane is REV 09, PEMs REV 04, QXM REV 06. All part numbers > are identical to my existing MX80 routers in this network, the only > difference is the hardware revision numbers, and the fact that this > device doesn't seem to want to run 10.4. I guess I won't plan on > deploying any new MX80s until I have time to test 11.2 or newer. > -- > Jeff S Wheeler <j...@inconcepts.biz> > Sr Network Operator / Innovative Network Concepts
Interesting, my MX5-T's midplane is rev 08, pem's rev 04, qxm rev 06, so it seems that the midplane is different but otherwise the same. Isn't there a couple of Juniper employees here that could shed some light into this? I'm currently running 11.2R5.4 as per the JTAC-recommendation list, I have nothing major to complain about but still, would prefer running 10.4-series as with the other edges. //T -- Timh Bergström Head of System Operations Videoplaza/System Operations timh.bergst...@videoplaza.com +46 727 406 845 S:t Eriksgatan 46 Stockholm www.videoplaza.com skype: timh_bergstrom gtalk: timh.bergst...@videoplaza.com linkedin: _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp