Yeah, we just ran into this weird release issue with hardware not being supported - in this case MX10-T ....
Anyways, I did do a no validate on a downgrade and it was miserable (had to reinstall OS via USB key). Live and learn ... ;) Running 11.2R5.4 on a pair of them at moment - as long as you're not doing BRAS functions it seems to work ok with BGP/MPLS/OSPF/IPv6 Paul -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Antti Ristimäki Sent: March-22-12 7:22 AM To: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] JunOS 10.4R8.5 on MX5? Am I forced to run 11.4+? 11.2R4.3 worked with our MX5/MX40s, although we upgraded to 11.2R6.3 because of a mib2d memory leak in 11.2R4.3. Other than that, it worked pretty OK at least with trivial config. AR On 03/22/2012 10:13 AM, Tima Maryin wrote: > Hi, > > > Here: > http://www.juniper.net/techpubs/en_US/junos11.2/information-products/t > opic-collections/release-notes/11.2/topic-57399.html > > > "New MX5, MX10, and MX40 3D Universal Edge Routers—Three new routers > based on the modular MX80 chassis are available in Junos OS Release 11.2R6." > > > Though in 11.4 relnotes it's 11.2R3 :-/ So you probably should try > 11.2R6. > > > > > On 22.03.2012 11:16, Timh Bergström wrote: >> Hi, >> >> I recently bought a MX5-T (Instead of the MX80-5G) and I'm running >> 10.4R8.5 on my other MX80s and would naturally like to run the same >> codebase on all my MX-series hardware. However when I try to install >> the 10.4R8.5 release on the MX5-T it says that the platform is not >> supported, I thought the MX5/10/40 was the same hardware as the MX80 >> (it surely looks the same, side-by-side)? >> >> Does anyone have any thoughts or information on this? It got >> delivered with 11.4R1.14 and I actually have no use of imix/etc >> whatever the new features is in the 11.X, I just want to run them as >> network edges with eBGP, iBGP and OSPF, no special stuff, and I'm >> happy with 10.4R8.5 so far. >> >> I also tried (for fun) to downgrade to 11.2R5.4 (which is the >> recommended release according to JTAC) but that didn't work either, >> the mgd process core-dumped and the validation failed, I did not run >> with "no-validate" (yet) for neither of the softwares. > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp