On Wed, May 09, 2012 at 03:13:26PM -0400, Clarke Morledge wrote: > It has been a couple of months since the JTAC recommended Junos > software versions has been updated for the MX. As of February, the > recommendation was to use 10.4R8.5 for the MX, except that there is an > issue related to BFD configurations on the DPC line cards. > Supposedly, the fix is in 10.4R9. > > In looking at the release notes, there are some issues that have been > resolved in the 11.x series but nothing noted yet for any future > 10.4.x releases. Perhaps there are future 10.4.x versions planned to > carry forward these fixes? > > I am curious to know about anyone's experience with 10.4R9 over the > past few months. I have DPC only currently; i.e. no MPC hardware -- > and no MultiServices.
There is a serious issue with MPLS RSVP auto-bandwidth in 10.4R9, which can cause the reservation calculations to be off by quite a bit. The least broken code we've found so far is 10.4S9, I'm surprised they haven't done an R10 yet. -- Richard A Steenbergen <r...@e-gerbil.net> http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp