We've started to implement 10.4R9 in Prod. A few MX960s with MPC & DPC mix and MX80s have been upgraded without a problem (knock on wood!). We use L2VPN & VPLS with OSPF/LDP/BGP.
Serge ________________________________ From: Clarke Morledge <chm...@wm.edu> To: juniper-nsp@puck.nether.net Sent: Wednesday, May 9, 2012 4:13:26 PM Subject: [j-nsp] Update on 10.4R9 stability for MX? It has been a couple of months since the JTAC recommended Junos software versions has been updated for the MX. As of February, the recommendation was to use 10.4R8.5 for the MX, except that there is an issue related to BFD configurations on the DPC line cards. Supposedly, the fix is in 10.4R9. In looking at the release notes, there are some issues that have been resolved in the 11.x series but nothing noted yet for any future 10.4.x releases. Perhaps there are future 10.4.x versions planned to carry forward these fixes? I am curious to know about anyone's experience with 10.4R9 over the past few months. I have DPC only currently; i.e. no MPC hardware -- and no MultiServices. Thanks. Clarke Morledge College of William and Mary Information Technology - Network Engineering Jones Hall (Room 18) Williamsburg VA 23187 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp