Hello there,
This might help
http://www.juniper.net/techpubs/en_US/junos12.1/topics/concept/source-class-usage-guidelines-solution.html
<quote>
A source or destination class is applied to a packet only once during the
routing table lookup. When a network prefix matches a class-usage policy,
SCU is assigned to packets first; DCU is assigned only if SCU has not been
assigned. Be careful when using both class types, since misconfiguration can
result in uncounted packets.
</quote>
Rgds
Alex
----- Original Message -----
From: "Alexander Shikoff" <minot...@crete.org.ua>
To: <juniper-nsp@puck.nether.net>
Sent: Tuesday, May 15, 2012 9:25 AM
Subject: [j-nsp] Destination Class Accounting: counters are zero
Hello List,
I have MX240 router (10.0 R4.7) with two peering links and two upstream
links.
I need separate accounting of customer's traffic: to/from upstreams and
to/from peerings.
I configured an SCU input accounting on peering and upstream links,
DCU and SCU output accounting on customer's link:
minot...@br1-gdr.ki# show interfaces ae0 unit 753
vlan-id 753;
family inet {
accounting {
source-class-usage {
output;
}
destination-class-usage;
}
no-redirects;
filter {
output bw-100M-U;
}
address 109.68.41.133/30;
}
Then I applied export policy to forwarding table, now every route
has an assigned class, for example:
minot...@br1-gdr.ki# run show route juniper.net table Salt extensive |
match class
Destination class: to-Upstream
Source class: from-Upstream
Now let's check extensive information about customer's interface:
minot...@br1-gdr.ki# run show interfaces ae0.753 extensive
Logical interface ae0.753 (Index 97) (SNMP ifIndex 197) (Generation 168)
Description: Downstream: Digital Screens Kurenevka
Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.753 ] Encapsulation: ENET2
Statistics Packets pps Bytes bps
Bundle:
Input : 1355645712 10824 1744298393787 125788672
Output: 676249013 3535 50730352637 1954232
Link:
ge-2/0/5.753
Input : 1355645712 10824 1744298393787 125788672
Output: 676249013 3535 50730352637 1954232
Marker Statistics: Marker Rx Resp Tx Unknown Rx Illegal Rx
ge-2/0/5.753 0 0 0 0
Protocol inet, MTU: 1500, Generation: 198, Route table: 6
Flags: No-Redirects, DCU, SCU-out
Packets Bytes
Destination class (packet-per-second) (bits-per-second)
to-Other 1966210 997515326
( 9) (
4129)
to-Peering 904424 1216778711
( 2932) (
32529971)
to-Upstream 0 0
( 0) (
0)
Packets Bytes
Source class (packet-per-second) (bits-per-second)
from-Other 88128 5568059
( 0) (
53)
from-Peering 534506 37189579
( 1136) (
664770)
from-Upstream 16017 1066310
( 97) (
49421)
Output Filters: bw-100M-U-ae0.753-o,
Addresses, Flags: Is-Preferred Is-Primary
Destination: 109.68.41.132/30, Local: 109.68.41.133, Broadcast:
109.68.41.135, Generation: 177
Protocol multiservice, MTU: Unlimited, Generation: 199, Route table: 6
Policer: Input: __default_arp_policer__
Why 'to-Upstream' counters are zeroes?
Thanks in advance!
--
MINO-RIPE
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp