Without any deeper analysis, and apart from the chassis being a bit more expensive, on the M/T the cost per Ethernet port is a bit high, and unless most services are connected via the EX42-VC it is probably not very cost effective.
> -----Original Message----- > From: Tom Storey [mailto:t...@snnap.net] > Sent: Wednesday, May 23, 2012 9:13 PM > To: Per Granath > Cc: MKS; juniper-nsp@puck.nether.net > Subject: Re: [j-nsp] what would you put in this PoP > > Assuming space were not an issue, is there a reason why you might avoid > something like an M320, or maybe a T320, being the traditional "multi- > protocol" boxes? > > Im just a curious bystander, trying to learn. :-) > > > On 23 May 2012 10:33, Per Granath <per.gran...@gcc.com.cy> wrote: > > MX240, with redundant REs, with two MPC1, two 2XE MIC, one ATM MIC, > one 20GE MIC. > > For the Business connections, do a VC of two EX4200, uplinks to the > available XE ports. > > > > If you have space, go for the MX480 which does not really cost much more. > > > > You need to figure out if you can use MPC1E (reduce scale L3) or MPC1-3D- > R-B (full scale L3), depending on your services (L3VPN?). > > > >> -----Original Message----- > >> From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp- > >> boun...@puck.nether.net] On Behalf Of MKS > >> Sent: Wednesday, May 23, 2012 1:32 AM > >> To: juniper-nsp@puck.nether.net > >> Subject: [j-nsp] what would you put in this PoP > >> > >> Hi > >> > >> Imagine a town of 15.000-20.000 people. What type of device/devices > >> and size would you put into this town, given the following > >> requirements > >> > >> Residential triple play (HSI, VoD, Multicast) > >> 8 IP dslams (GigE) > >> Vod servers (4 GigE pors) > >> > >> Business connections (L3VPN) > >> 10 Business connections on GigE > >> 30-40 Business connections 10-100 mb > >> > >> AToM > >> ATMoMPLS port mode, 4 STM1 ports needed. > >> > >> Uplinks on 10GbE in a ring based structure, current traffic levels > >> 2-3 gigs total BNG termination (pppoe) is not a requirement > >> > >> Spare parts are located 4-5 hours away. > >> > >> 1) If you where given a clean slate, what would you put in? > >> 2) What do you put normally, given your normal capex level. > >> > >> Regards > >> MKS > >> _______________________________________________ > >> juniper-nsp mailing list juniper-nsp@puck.nether.net > >> https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp