Phill,
Could ou please share some juniper links or configurations on how about
to configure SRX boxes with MPLS in a RING topology ?
Are you using L3 MPLS VPN or L2 VPLS or EoMPLS ?
Is it possible to share some configurations or links ?
Thanks a lot,
Giuliano
On 15/08/12 15:29, Johan Borch wrote:
Hi,
I have a design question regarding MPLS.
I'm planning to create a MPLS rings with 4-8 SRX240 devices in packet
mode
and the main purpose is L3VPN/VPLS
p1-p2-p3-p4-p5-p1 (p5 connects back to p1)
My budget is low for this and the srx240 is cheap, we will push max
1Gbps.
That should be ok. I've had hundreds of megabits of MPLS out of the SRX210.
For example in some sites there will be two SRX and the plan is to use
these two as P/PE and use VRRP for customer equipment. At the same time
they will be P routers for other sites.
Example site:
P1--------P3-P4----------P5
\ /
(vrrp)
Customer equipment
Do I make any sense? Will this work? :)
Should do. We use them in similar (but not identical) configurations.
I've never tested VRRP on them, however.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
