Hello. This may help you: http://www.juniper.net/techpubs/software/junos/junos91/mx-solutions-guide/configuring-basic-mx-series-layer-2-features.html
2012/8/29 Robert Hass <robh...@gmail.com> > Hi > > I need to transport VLAN (switch / bridge) from port xe-0/0/1 (unit > 200) to port xe-0/0/2 (unit 200) on MX80. > It it possible ? If yes can anyone paste configuration for this task. > Can I enable QinQ for this VLAN also ? > > BTW. I'm running 10.4S10 > > Rob > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp