It depends on what you want to do. Should the receiver receive both
sources simultaneously and demultiplex the two? Or do you need failover
of some kind?
/Chris
On 22/11/12 5:40 PM, Riccardo S wrote:
Hi expert team,
I’ve a generic multicast question.
Let’s say I’ve two different source
sending different multicast traffic over the same multicast group, how can I
solve the problem for a customer receiver ?
S1=1.1.1.1 G1=224.1.1.1
S2=2.2.2.2 G2=224.1.1.1
Customer receiver is usually running
IGMPv2 and I cannot force to use IGMPv3.
Network in the middle between source
and receiver is not MPLS.
I’ve thought to NAT multicast group,
but I’m not sure it works and if anyone has already implemented it…
Any different solution is
appreciated…
Tks
Ric
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
