On (2012-11-26 10:29 +1100), Ali Sumsam wrote: > Actually I am working on migration from Cisco to Juniper. > On Cisco router weight attribute is used and have to set same preference > same on Juniper.
No, weight does not do this. Weight is Cisco local-scope attribute as first decision-maker for preference, think of it as non-transitive local-pref on steroids. There is no reason to muck with weight in Cisco when doing Cisco/Juniper migration. Only situation where I've had to adjust weight in IOS, is to set backup route weight to 0, so that even backup PE will go to network and primary PE, instead of going to customer directly at backup PE. This hack would not need porting to Juniper. You could just skip it. -- ++ytti _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp