Thats the current version of this router. JUNOS Base OS boot [11.4R1.14] JUNOS Base OS Software Suite [11.4R1.14] JUNOS Kernel Software Suite [11.4R1.14] JUNOS Packet Forwarding Engine Support (MX80) [11.4R1.14] JUNOS Online Documentation [11.4R1.14] JUNOS Routing Software Suite [11.4R1.14]
*Ali Sumsam CCIE* *Network Engineer - Level 3* eintellego Pty Ltd a...@eintellego.net ; www.eintellego.net Phone: 1300 753 383 ; Fax: (+612) 8572 9954 Cell +61 (0)410 603 531 facebook.com/eintellego PO Box 7726, Baulkham Hills, NSW 1755 Australia The Experts Who The Experts Call Juniper - Cisco – Brocade - IBM On Fri, Nov 30, 2012 at 12:36 PM, Stacy W. Smith <st...@acm.org> wrote: > Can you share the current version and existing config? If it really is as > simple as you say, then I would not expect a problem, but it would be > interesting to investigate why it's complaining. > > --Stacy > > On Nov 29, 2012, at 6:33 PM, Ali Sumsam <ali+juniper...@eintellego.net> > wrote: > > but that will kinda bypass it. > > Should i worry about it or just ignore it? > > > > Regards, > > *Ali Sumsam CCIE* > > *Network Engineer - Level 3* > > eintellego Pty Ltd > > a...@eintellego.net ; www.eintellego.net > > > > Phone: 1300 753 383 ; Fax: (+612) 8572 9954 > > > > Cell +61 (0)410 603 531 > > > > facebook.com/eintellego > > PO Box 7726, Baulkham Hills, NSW 1755 Australia > > > > The Experts Who The Experts Call > > Juniper - Cisco – Brocade - IBM > > > > > > > > On Fri, Nov 30, 2012 at 12:30 PM, OBrien, Will <obri...@missouri.edu> > wrote: > > > >> no-validate > >> > >> That is, request system software install no-validate blah > >> > >> > >> On Nov 29, 2012, at 7:25 PM, Ali Sumsam wrote: > >> > >>> Hi, > >>> I have a brand new MX5 router for one of my customers. The only > >>> configuration I have on this router is > >>> > >>> 1, one login name and password > >>> 2, IP address on FXP0 > >>> 3, telnet and ftp service. > >>> > >>> I have uploaded Junos jinstall-ppc-11.2R5.4-export-signed.tgz, which is > >> the > >>> recommended one for MX5 on juniper site. > >>> > >>> > >>> When i try to validate this JunOS, it gives me following error. > >>> > >>> mgd: error: configuration check-out failed > >>> Validation failed > >>> WARNING: Current configuration not compatible with > >>> /var/tmp/jinstall-ppc-11.2R5.4-export-signed.tgz > >>> > >>> Any suggestion. Can I just ignore this error and live with it? > >>> > >>> Regards, > >>> > >>> > >>> *Ali Sumsam CCIE* > >>> *Network Engineer - Level 3* > >>> eintellego Pty Ltd > >>> a...@eintellego.net ; www.eintellego.net > >>> > >>> Phone: 1300 753 383 ; Fax: (+612) 8572 9954 > >>> > >>> Cell +61 (0)410 603 531 > >>> > >>> facebook.com/eintellego > >>> PO Box 7726, Baulkham Hills, NSW 1755 Australia > >>> > >>> The Experts Who The Experts Call > >>> Juniper - Cisco – Brocade - IBM > >>> _______________________________________________ > >>> juniper-nsp mailing list juniper-nsp@puck.nether.net > >>> https://puck.nether.net/mailman/listinfo/juniper-nsp > >> > >> > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp