Hi, There is an ACL on a Cisco router which doesn't have a statement which allows the BGP peering IPs through the interface (where the ACL is applied). However, the BGP is still getting established.
I am doing the same thing on Juniper, and the BGP peering is not coming up. If I allow the BGP peer IP in the Juniper firewall filter, it lets the BGP come up. My assumption is that Cisco doesn't apply the ACL on the traffic that is generated by the router itself. Is this the reason of the above behavior? Or is there something else? Please comment. Regards, *Ali Sumsam CCIE* *Network Engineer - Level 3* eintellego Pty Ltd a...@eintellego.net ; www.eintellego.net Phone: 1300 753 383 ; Fax: (+612) 8572 9954 Cell +61 (0)410 603 531 facebook.com/eintellego PO Box 7726, Baulkham Hills, NSW 1755 Australia The Experts Who The Experts Call Juniper - Cisco – Brocade - IBM _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp