BGP needs to be allowed in loopback JCL if you have one applied. Otherwise the peer wont come up.
On Fri, Nov 30, 2012 at 5:36 PM, Ali Sumsam <ali+juniper...@eintellego.net>wrote: > Hi, > There is an ACL on a Cisco router which doesn't have a statement which > allows the BGP peering IPs through the interface (where the ACL is > applied). However, the BGP is still getting established. > > I am doing the same thing on Juniper, and the BGP peering is not coming up. > If I allow the BGP peer IP in the Juniper firewall filter, it lets the BGP > come up. > > My assumption is that Cisco doesn't apply the ACL on the traffic that is > generated by the router itself. Is this the reason of the above behavior? > Or is there something else? Please comment. > > Regards, > *Ali Sumsam CCIE* > *Network Engineer - Level 3* > eintellego Pty Ltd > a...@eintellego.net ; www.eintellego.net > > Phone: 1300 753 383 ; Fax: (+612) 8572 9954 > > Cell +61 (0)410 603 531 > > facebook.com/eintellego > PO Box 7726, Baulkham Hills, NSW 1755 Australia > > The Experts Who The Experts Call > Juniper - Cisco – Brocade - IBM > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp