Thanks! It works :-)
Should this also work in the vrf? Global: pe...@ar100.nn# run show pim rps Instance: PIM.master address-family INET RP address Type Mode Holdtime Timeout Groups Group prefixes 10.224.0.255 auto-rp sparse 181 175 1 224.0.0.0/4 pe...@ar100.nn> show pim rps instance iptv Instance: PIM.bynett address-family INET address-family INET6 We should get another RP. [edit routing-instances iptv] pe...@ar100.nn# show instance-type vrf; interface ge-0/0/0.0; interface lo0.1; route-distinguisher 65339:50; provider-tunnel { pim-asm { group-address 239.1.1.1; } } vrf-target target:65339:50; vrf-table-label; protocols { pim { dense-groups { 224.0.1.39/32; 224.0.1.40/32; } vpn-tunnel-source 10.224.0.96; vpn-group-address 239.1.1.1; rp { auto-rp discovery; } } interface lo0.1 { mode sparse-dense; } interface ge-0/0/0.0 { mode sparse-dense; } } } > Add this to your config: > > [edit protocols pim] > user@host# set dense-groups 224.0.1.39/32 > user@host# set dense-groups 224.0.1.40/32 > > Further info can be found here: > http://www.juniper.net/techpubs/en_US/junos12.2/topics/topic-map/mcast-pim-auto-rp.html > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp