That will *only* grab traffic to the control plane, not through the interfaces. For what its worth.
-Tim Eberhard On Tue, Dec 11, 2012 at 12:24 PM, 叶雨飞 <sunyuc...@gmail.com> wrote: > monitor traffic no-resolve interface xxxxx write-file xxx.pcap > > or, if you prefer, simply start shell then tcpdump -i xxx -n -p -w > xxxx.pcap > > On Tue, Dec 11, 2012 at 9:00 AM, mahmoud yasin <eng_mahmoo...@yahoo.com> > wrote: > > Hi > > > > How to use TCPDump to capture the In/Out traffic from the firewall > interface (device self generated traffic). > > Also how to read the output using wireshark (how to get a copy of the > file)? > > This is required for High-end firewalls. > > > > Regards > > Myasin > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp