Thank you All
________________________________ From: Tim Eberhard <xmi...@gmail.com> To: 叶雨飞 <sunyuc...@gmail.com> Cc: mahmoud yasin <eng_mahmoo...@yahoo.com>; "juniper-nsp@puck.nether.net" <juniper-nsp@puck.nether.net> Sent: Tuesday, December 11, 2012 10:27 PM Subject: Re: [j-nsp] TCPDUMP on High-end SRX That will *only* grab traffic to the control plane, not through the interfaces. For what its worth. -Tim Eberhard On Tue, Dec 11, 2012 at 12:24 PM, 叶雨飞 <sunyuc...@gmail.com> wrote: monitor traffic no-resolve interface xxxxx write-file xxx.pcap > >or, if you prefer, simply start shell then tcpdump -i xxx -n -p -w xxxx.pcap > > >On Tue, Dec 11, 2012 at 9:00 AM, mahmoud yasin <eng_mahmoo...@yahoo.com> wrote: >> Hi >> >> How to use TCPDump to capture the In/Out traffic from the firewall interface >> (device self generated traffic). >> Also how to read the output using wireshark (how to get a copy of the file)? >> This is required for High-end firewalls. >> >> Regards >> Myasin >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >_______________________________________________ >juniper-nsp mailing list juniper-nsp@puck.nether.net >https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp