Make sure auto-negotiation is either enabled on both ends, or disabled on both ends.
On the Juniper side: set interfaces ge-x/y/z gigether-options no-auto-negotiation or delete interfaces ge-x/y/z gigether-options no-auto-negotiation Also, check the optics TX/RX levels on both ends to be sure they are within spec. On Thu, Dec 13, 2012 at 11:39:46AM +1100, Ali Sumsam wrote: > Hi All, > > I am trying to connect a Cisco3560 with Juniper EX-2200 over a mulitmode > fiber. I am using Cisco SX SFP for this. > > On Cisco Side interface status is in up/up state but on juniper side it is > down. What could be the reason? > > I know SFP is not faulty. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp