definitely possible to put sub ifs into logical systems. You have to define encapsulation flex ether services and flexible vlan tagging (or otherwise) on the base then specify vlan tags and per unit encapsulation in the unit within the logical system config as usual.
Cheers, Caillin Sent from my Windows Phone -----Original Message----- From: Benny Amorsen Sent: 24/01/2013 10:49 PM To: Skeeve Stevens Cc: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] Splitting Dot1q VLAN across Logical Systems Skeeve Stevens <skeeve+juniper...@eintellego.net> writes: > I'm hearing I have to allocate a whole physical interface to a Logical > System which means I can't use a VLAN from it for another Logical System. > > Does this make sense with what I am looking to do? You should be able to assign logical interfaces to each logical system. E.g. place xe-0 unit 100 in logical system A and xe-0 unit 200 in logical system B on both routers. /Benny _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp -- Message protected by MailGuard: e-mail anti-virus, anti-spam and content filtering.http://www.mailguard.com.au/mg _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
