Interesting to see that the PR is listed as resolved in 13.1R1. -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Sebastian Wiesinger Sent: Thursday, 21 February 2013 8:32 PM To: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] MX80 BGP performance after reboot
* Sebastian Wiesinger <juniper-...@ml.karotte.org> [2013-02-19 13:57]: > Yes, I agree. But that's a design "decision" so ATAC is not > interested. I'll try to get this to Juniper trough my SE but I don't > know if that'll do any good. So Juniper is aware that this is a problem (at least for some people) and there are people working on it. It's not trivial so I don't expect any short-term solutions / improvement. There is also a NANOG discussion regarding this: http://mailman.nanog.org/pipermail/nanog/2013-January/054694.html The current PR seems to be PR836197 https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR836197 Regards Sebastian -- GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A 9D82 58A2 D94A 93A0 B9CE) 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE. -- Terry Pratchett, The Fifth Elephant _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp -- Message protected by MailGuard: e-mail anti-virus, anti-spam and content filtering.http://www.mailguard.com.au/mg _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp