Are the st-interfaces UP? What does show security ipsec security-associations say? (Am offline; spellcheck needed...)
Bjørn Tore @ mobil Den 20. mars 2013 kl. 15:46 skrev Bill Sandiford <b...@telnetcommunications.com>: > Hi All, > > I need some help with an IPSEC tunnel that I just can't seem to get working > on a J-6350. I have been able to get the tunnels to come up, but can't seem > to pass traffic over the tunnels > > I've done the usual things. I've created an st0.0 interface and bound it to > the tunnel using the bind-interface command. I've created a static route and > pointed it at the st0.0 interface. I just can't seem to get traffic to pass > over the tunnel. > > Any help or suggestions would be appreciated. I'm also willing to put a $$$ > bounty on this for anyone that is willing to help me get it working via > teamviewer. > > Regards, > Bill > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp