Hi all,
I'm running a cluster of srx 240 connected to a pair of cisco 2960
switches with a port channel.
ESXi servers are also connected to the same stack of cisco switches.
vlan 1000 with ip 192.168.100.0 is used for out of band management and
reachability.
I'm using a dedicated virtual router to route the traffic from this vlan
to other vlans.
Some virtual machines can be reached but some others can't.
I upgraded today to 12.1X45-D15.5, as I require vpn termination on
loopback interface,
and I suspect this release to have introduced weirdness into the
configuration.
Does anyone use a pair of srx devices with this release 12.1X45-D15.5
have some issues with
this kind of configuration ?
Are there any specific configurations to be used on the port channels
connected to the srx on the cisco stack ?
Best regards.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp