On 24 Oct 2013, at 1:12 am, pkc_mls <pkc_...@yahoo.fr> wrote: > Hi all, > > I'm running a cluster of srx 240 connected to a pair of cisco 2960 switches > with a port channel. > > ESXi servers are also connected to the same stack of cisco switches. > > vlan 1000 with ip 192.168.100.0 is used for out of band management and > reachability. > > I'm using a dedicated virtual router to route the traffic from this vlan to > other vlans. > > Some virtual machines can be reached but some others can't. > > I upgraded today to 12.1X45-D15.5, as I require vpn termination on loopback > interface, > and I suspect this release to have introduced weirdness into the > configuration. > > Does anyone use a pair of srx devices with this release 12.1X45-D15.5 have > some issues with > this kind of configuration ? > > Are there any specific configurations to be used on the port channels > connected to the srx on the cisco stack ? > > Best regards. > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp >
Can you confirm that you have two "active" port-channels configured on the Cisco side, one into each SRX? _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp