> Would anyone care to share a config example that would allow outer TPID > translation between two different ports on an MX80? The scenario is > receiving q-in-q traffic from a carrier that only supports a TPID of > 0x9100 on the outer tag (inner tag is still 0x8100). Our internal > network is all 0x8100 for both inner and outer tags. I would like to be > able to pass all inner vlan tags (ie I don't know what tags the customer > uses).
Something like the following should do the trick: router# show protocols connections interface-switch tpidrewrite interface ge-1/0/0.123; interface ge-1/1/1.123; router# show interfaces ge-1/0/0 flexible-vlan-tagging; encapsulation flexible-ethernet-services; gigether-options { ethernet-switch-profile { tag-protocol-id [ 0x8100 0x9100 ]; } } unit 123 { encapsulation vlan-ccc; vlan-tags outer 123; input-vlan-map pop; output-vlan-map { push; tag-protocol-id 0x9100; } } router# show interfaces ge-1/1/1 flexible-vlan-tagging; encapsulation flexible-ethernet-services; unit 123 { encapsulation vlan-ccc; vlan-tags outer 123; input-vlan-map pop; output-vlan-map push; } Steinar Haug, Nethelp consulting, sth...@nethelp.no _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp