On Mon, 1 Dec 2014, Jordan Whited wrote:
Has anyone else made the jump to 12.3R8 yet?
I did on my two MX480s over the past few weeks. IPFIX jflow sampling has
been re-enabled. So far, no unusually high CPU spikes. BGP convergence
times are acceptable (<~50 seconds to pull in a full IPv4 BGP feed).
This is on 12.3R8.7.
I also have it running on a pair of MX5s on my lab, but I don't have
sampling enabled on those boxes at the moment.
jms
On Wed, Oct 1, 2014 at 8:35 AM, Justin M. Streiner <strei...@cluebyfour.org>
wrote:
On Wed, 1 Oct 2014, Sebastian Wiesinger wrote:
* Graham Brown <juniper-...@grahambrown.info> [2014-09-23 22:33]:
12.3R8 and 13.3R4 are due out anytime now with the fixes in place. I
think
there are many people waiting for these two releases...
So, 12.3R8 is out. Any practical experiences if inline jflow /
sampling is faster now?
Not sure yet. I need to load it on my lab routers, but I won't know how
it behaves at full scale until I load it in production.
jms
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp