Hi,
Am 23.12.2014 um 23:23 schrieb Dave Peters - Terabit Systems:
1 alarm currently active
Alarm time Class Description
2014-12-23 21:50:13 UTC Major CB 0 FPGA Revision unsupported
In looking over the Juniper documentation, there's a "request system firmware" command to
update the SCB, but unfortunately, I'm not seeing that option (meaning "request system ?"
doesn't reveal firmware as a possibility). I'm also not seeing any specific BIOS/firmware files in
the download section of the Juniper MX Series portion of the Juniper website.
It is a hidden command, so you have to manually complete it. After the firmware
it starts to auto complete:
request system firmware ?
Possible completions:
downgrade
upgrade
request system firmware upgrade ?
Possible completions:
fpc Upgrade FPC ROM monitor
pic Upgrade PIC firmware
vcpu Upgrade VCPU ROM monitor
The output above is from an MX240 with SCB.
I have never seen that error showing up but from what i have seen on similar
situations the firmware should be embedded in junos and the firmware upgrade
should just work without additional files. But SCB seems not to be a valid
upgrade target on MX:
request system firmware upgrade scb
error: command is not valid on the mx480
tested on MX480 with SCBE
Would you by any chance have bought SCBE2 (they would probably not been
available in used condition) instead of SCB. Just asking because SCBE2 is
supported starting from 13.something and does not work in 12.3
--
Kind Regards
Tobias Heister
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp