Thanks a lot for the information.

It's definitely an SCBE (not a 2), but I tried upgrading to a 13 version just 
in case. Same FPGA revision error, and same firmware dead end. 

I appreciate the help. If anyone else has any pointers, let me know.

-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of 
Tobias Heister
Sent: Tuesday, December 23, 2014 2:54 PM
To: juniper-nsp@puck.nether.net
Subject: Re: [j-nsp] MX480 SCB firmware issue

Hi,

Am 23.12.2014 um 23:23 schrieb Dave Peters - Terabit Systems:
> 1 alarm currently active
> Alarm time               Class  Description
> 2014-12-23 21:50:13 UTC  Major  CB 0 FPGA Revision unsupported
>
> In looking over the Juniper documentation, there's a "request system 
> firmware" command to update the SCB, but unfortunately, I'm not seeing that 
> option (meaning "request system ?" doesn't reveal firmware as a possibility). 
> I'm also not seeing any specific BIOS/firmware files in the download section 
> of the Juniper MX Series portion of the Juniper website.

It is a hidden command, so you have to manually complete it. After the firmware 
it starts to auto complete:

> request system firmware ?
> Possible completions:
>   downgrade
>   upgrade

> request system firmware upgrade ?
> Possible completions:
>   fpc                  Upgrade FPC ROM monitor
>   pic                  Upgrade PIC firmware
>   vcpu                 Upgrade VCPU ROM monitor

The output above is from an MX240 with SCB.

I have never seen that error showing up but from what i have seen on similar 
situations the firmware should be embedded in junos and the firmware upgrade 
should just work without additional files. But SCB seems not to be a valid 
upgrade target on MX:

> request system firmware upgrade scb
> error: command is not valid on the mx480

tested on MX480 with SCBE

Would you by any chance have bought SCBE2 (they would probably not been 
available in used condition) instead of SCB. Just asking because SCBE2 is 
supported starting from 13.something and does not work in 12.3

--
Kind Regards
Tobias Heister
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net 
https://puck.nether.net/mailman/listinfo/juniper-nsp

_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to