Might be power. I've got two 208V's lit. Awaiting electrician on the rest. Doing the request says the FPC is in transition.
On 03/04/2015 09:17 AM, Iftikhar Ahmed wrote: > How many power supplies you have in the box? > Did you try "request chassis fpc slot X online" > Do you see any error in log messages? > > > -----Original Message----- > From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of > Pete Ashdown > Sent: Wednesday, March 04, 2015 8:12 PM > To: juniper-nsp@puck.nether.net > Subject: [j-nsp] Activating FPC's on an EX8208 > > I just purchased a used EX8208 due to the fact that my EX4550's don't handle > IPv6 filtering on vlans. Now I'm having trouble getting the > EX8208 to recognize any of its FPCs. "Show chassis hardware" and "show > chassis fpc" don't have anything in them at all and the ON LED on each card > isn't lit, even though I have "set chassis fpc N power on" for each of them. > I am planning to buy a service contract if I can actually get the box in > service, but I've sort of got a chicken-and-the-egg problem here. > > Any help is appreciated. > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp