I'm pretty sure MPLS over GRE is not supported on EX4200's. I would have my doubts that PFE could do it.
If you want to do that you would be better off getting two of the branch SRX's (depending on traffic levels) to do this I think as it will give you more flexibility. On Tue, May 12, 2015 at 2:10 PM, Victor Sudakov <v...@mpeks.tomsk.su> wrote: > Mark Tees wrote: >> >> The only way I am aware of that works with ex4200s is tunnelling over >> MPLS. This would require MPLS on the backbone to work. >> >> http://www.juniper.net/techpubs/en_US/junos13.2/topics/task/configuration/mpls-ex-series-provider-edge-switches-ccc-cli.html > > The third party IP network I would like to tunnel through has no MPLS > support. > > Maybe I should run some sort of GRE tunnel over this network, and then > MPLS over this GRE tunnel, and the L2 tunnel over MPLS? > > To think of it, even if it's possible with ex4200s, I'd rather keep > the FreeBSD servers. This is a clever setup after all (sorry, the > explanation is in Russian only, but the script is in sh): > http://victor-sudakov.dreamwidth.org/330817.html > > -- > Victor Sudakov, VAS4-RIPE, VAS47-RIPN > sip:suda...@sibptus.tomsk.ru -- Regards, Mark L. Tees _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
