Hello, I configured an EX3300-48T. The 4 interfaces SFP have the same configuration When I connect the optical fiber in the optical transceiver, I have the green led on the each interfaces. But if I can ping IP @ of the switch (or the gateway) on interfaces ge-0/1/0 and ge-0/1/1 , I can't ping the IP @ of the switch on interfaces ge-0/1/2 and ge-0/1/3. I don't understand why the interfaces ge-0/1/2 and ge-0/1/3 are not in order. I have the following error message: "No route to host"
Can you help me to understand that ? Thanks PS: The config of the interfaces: ge-0/1/0 { description "ROCADE VERS COEUR DE RESEAU"; unit 0 { family ethernet-switching { port-mode trunk; vlan { members all; } } } } ge-0/1/1 { description "ROCADE VERS COEUR DE RESEAU"; unit 0 { family ethernet-switching { port-mode trunk; vlan { members all; } } } } ge-0/1/2 { description "ROCADE VERS COEUR DE RESEAU"; unit 0 { family ethernet-switching { port-mode trunk; vlan { members all; } } } } ge-0/1/3 { description "ROCADE VERS COEUR DE RESEAU"; unit 0 { family ethernet-switching { port-mode trunk; vlan { members all; } } } } _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp