Thanks a lot ! Now I can use the 4 interfaces as trunk link. Thanks you again
----- Mail original ----- De: "Raphael Mazelier" <r...@futomaki.net> À: juniper-nsp@puck.nether.net Envoyé: Mardi 26 Mai 2015 18:31:14 Objet: Re: [j-nsp] EX3300 : Pbm with inerfaces SFP Le 26/05/15 18:25, deloin.rob...@laposte.net a écrit : > Hello, > > I configured an EX3300-48T. The 4 interfaces SFP have the same configuration > When I connect the optical fiber in the optical transceiver, I have the green > led on the each interfaces. > But if I can ping IP @ of the switch (or the gateway) on interfaces ge-0/1/0 > and ge-0/1/1 , > I can't ping the IP @ of the switch on interfaces ge-0/1/2 and ge-0/1/3. > I don't understand why the interfaces ge-0/1/2 and ge-0/1/3 are not in order. > I have the following error message: "No route to host" > > Can you help me to understand that ? > By default xe-0/1/2 and xe-0/1/3 are reserved for VCP. So when you do "show interface terse" , you don't show them, but you show vcp interface instead. You can use these interface with the following command : request virtual-chassis vc-port delete pic-slot 1 port 2 request virtual-chassis vc-port delete pic-slot 1 port 3 Regards, -- Raphael Mazelier _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp