Thanks David; how was configured the port or lag itself on the SE side? Between encap rw, transport, or whatever, I don't have much success.
thank, Olivier > Le 10 juil. 2015 à 12:00, david....@orange.com a écrit : > > Here the config part of SE : > > > > l2vpn profile L2PROFILE > peer X.X.X.X > log-pw-up-down > remote-encap ethernet > > l2vpn > > xc-group collect > xc lg GEC3 vlan-id 1668 vc-id 1668 profile L2PROFILE > > > > David Roy > IP/MPLS NOC engineer - Orange France > Ph. : +33 2 99 28 57 66 > Mob. : +33 6 85 52 22 13 > SkypeID : davidroy.35 > david....@orange.com > > JNCIE x3 (SP #703 ; ENT #305 ; SEC #144) > > > -----Original Message----- > From: Olivier Benghozi [mailto:olivier.bengh...@wifirst.fr] > Sent: jeudi 9 juillet 2015 23:26 > To: ROY David DTSI/DERS > Cc: redback-...@puck.nether.net; juniper-nsp > Subject: Re: [j-nsp] L2VPN between Juniper MX and SmartEdge > > Hi David, > > any suggestions about the SE config part ? > I tried both in dot1q and dot1q tunnel, on the port. > > > Olivier > >> Le 9 juil. 2015 à 23:19, david....@orange.com a écrit : >> >> Hello >> >> Here my config on MX which works with SE routers: >> >> >> xe-19/0/2 { >> vlan-tagging; >> mtu 4488; >> encapsulation flexible-ethernet-services; >> unit 1668 { >> encapsulation vlan-ccc; >> vlan-id 1668; >> input-vlan-map pop; >> output-vlan-map push; >> } >> l2circuit { >> neighbor X.X.X.X { >> interface xe-19/0/2. 1668{ >> virtual-circuit-id 1668; >> encapsulation-type ethernet; >> } >> } >> } >> >> David Roy >> IP/MPLS NOC engineer - Orange France >> Ph. : +33 2 99 28 57 66 >> Mob. : +33 6 85 52 22 13 >> SkypeID : davidroy.35 >> david....@orange.com >> >> JNCIE x3 (SP #703 ; ENT #305 ; SEC #144) >> >> >> -----Original Message----- >> From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On >> Behalf Of Olivier Benghozi >> Sent: jeudi 9 juillet 2015 22:07 >> To: redback-...@puck.nether.net; juniper-nsp >> Subject: [j-nsp] L2VPN between Juniper MX and SmartEdge >> >> Hi guys, >> >> any clue about interoperability issue between Juniper (some MX in JunOS >> 13.3R5, MPC cards) and Redback (SE600, SEOS 12.1.1.9, PPA3 20x1GE card) >> about L2VPN pseudowire, Martini style (using LDP signaling and LDP LSP) ? >> >> I'm trying to use such feature to forward a vlan between some equipments >> plugged to those two routers; the tunnel is up, packets flow from the >> Redback dot1q pvc to the stuff plugged behind the MX vlan-tagged unit (in >> family vlan-ccc), but in the other direction, the SmartEdge keeps saying >> "packets sent: 0" on the physical port... >> >> >> Thanks. >> Olivier >> >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> >> ______________________________________________________________________ >> ___________________________________________________ >> >> Ce message et ses pieces jointes peuvent contenir des informations >> confidentielles ou privilegiees et ne doivent donc pas etre diffuses, >> exploites ou copies sans autorisation. Si vous avez recu ce message >> par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les >> pieces jointes. Les messages electroniques etant susceptibles d'alteration, >> Orange decline toute responsabilite si ce message a ete altere, deforme ou >> falsifie. Merci. >> >> This message and its attachments may contain confidential or >> privileged information that may be protected by law; they should not be >> distributed, used or copied without authorisation. >> If you have received this email in error, please notify the sender and >> delete this message and its attachments. >> As emails may be altered, Orange is not liable for messages that have been >> modified, changed or falsified. >> Thank you. >> > > > _________________________________________________________________________________________________________________________ > > Ce message et ses pieces jointes peuvent contenir des informations > confidentielles ou privilegiees et ne doivent donc > pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu > ce message par erreur, veuillez le signaler > a l'expediteur et le detruire ainsi que les pieces jointes. Les messages > electroniques etant susceptibles d'alteration, > Orange decline toute responsabilite si ce message a ete altere, deforme ou > falsifie. Merci. > > This message and its attachments may contain confidential or privileged > information that may be protected by law; > they should not be distributed, used or copied without authorisation. > If you have received this email in error, please notify the sender and delete > this message and its attachments. > As emails may be altered, Orange is not liable for messages that have been > modified, changed or falsified. > Thank you. > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
