Hi all I have a cisco/juniper case According to what I know , the router can only have one LDP router-id
I have one of my PEs (Cisco) configured with a private IP address (loopback 0) and is configured as MPLS LDP router-id I have a new connection with an uplink provider with Juniper being his terminating device The provider insists to use public router-id from my side , I configured a new one and advertised it to him through the BGP session we established , but the LDP session never come up I have tested the same case with Cisco on gns3 , even If he cannot reach my actual router-id , I can use the mpls ldp discovery transport-address {public address} and the session is up , as well as , I configured xconnect using the public router-id and all is fine Have anyone faced something similar ? _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp