On 23/09/15 14:30, Chuck Anderson wrote:
Really? So you can't use EX4300 at 10 Mbps (I don't know of any
devices that support 10/Full)? If this is true, it is a
purchase-stopper for us.
10/full works fine.
10/half (or 100/half) does NOT work:
http://www.juniper.net/documentation/en_US/junos13.2/topics/task/configuration/ex-series-gigabit-interfaces-cli-els.html
"""
Note: On EX4300 switches, the interfaces operate in full duplex mode only.
"""
We've confirmed this by inspecting the autoneg caps advertised from the
device; all half-duplex modes are absent.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp