Hi, I use the MX480 router, unfortunately i can't use IP-monitoring...
Regards, Fabien Le Boëdec >----- Mail original ----- >De: "Dave Bell" <[email protected]> >À: "Fabien Leboedec" <[email protected]> >Cc: [email protected] >Envoyé: Lundi 12 Octobre 2015 10:56:11 >Objet: Re: [j-nsp] Static route with tracking >Hi Fabien, >It depends on the platform you are using. If you are using the SRX you >can use IP monitoring >https://www.juniper.net/techpubs/en_US/junos12.1x44/topics/example/ip-monitoring-security-configuring.html >I'm not aware of any other method outside of EventScript. >Regards, >Dave On 12 October 2015 at 08:28, Fabien Leboedec <[email protected]> wrote: > Hi everybody, > > I need your help to know if it's possible to set an static route with > tracking (like dvsr on Redback or IP SLA + tracking on Cisco) on MX480 (Junos > V13.3R7.4)? > > I want to install in the forwarding table and propagate one static route in > iBGP only if the IP of Gateway if reachable. > > It's possible to do this in very simple manner without Eventscript? > > Thanks you to your answers > Regards, > > > > Fabien Le Boëdec > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
