> show virtual-chassis Preprovisioned Virtual Chassis Virtual Chassis ID: cf12.a99f.e63b Virtual Chassis Mode: Enabled Mstr Mixed Route Neighbor List Member ID Status Serial No Model prio Role Mode Mode ID Interface 0 (FPC 0) Prsnt TA3714071234 qfx5100-48s-6q 129 Master* N VC 2 vcp-255/0/50 1 vcp-255/0/51 1 (FPC 1) Prsnt TA3714141234 qfx5100-48s-6q 129 Backup N VC 0 vcp-255/0/50 2 vcp-255/0/51 2 (FPC 2) Prsnt TA3714141234 qfx5100-48s-6q 0 Linecard N VC 1 vcp-255/0/50 0 vcp-255/0/51
See vcp-255/0/51 ports: > show virtual-chassis vc-port fpc0: -------------------------------------------------------------------------- Interface Type Trunk Status Speed Neighbor or ID (mbps) ID Interface PIC / Port 0/50 Configured -1 Up 40000 2 vcp-255/0/51 0/51 Configured -1 Up 40000 1 vcp-255/0/50 fpc1: -------------------------------------------------------------------------- Interface Type Trunk Status Speed Neighbor or ID (mbps) ID Interface PIC / Port 0/50 Configured -1 Up 40000 0 vcp-255/0/51 0/51 Configured -1 Up 40000 2 vcp-255/0/50 fpc2: -------------------------------------------------------------------------- Interface Type Trunk Status Speed Neighbor or ID (mbps) ID Interface PIC / Port 0/50 Configured -1 Up 40000 1 vcp-255/0/51 0/51 Configured -1 Up 40000 0 vcp-255/0/50 So: request virtual-chassis vc-port delete pic-slot X port Y member Z -----Mensagem original----- De: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] Em nome de Dave Peters - Terabit Systems Enviada em: quinta-feira, 12 de novembro de 2015 18:05 Para: juniper-nsp@puck.nether.net Assunto: [j-nsp] VC on a QFX5100 won't go away Hi all-- I've been trying to remove the VC config from a QFX5100 running 13.2X51-D38, and I'm not having any luck. I've tried zeroizing and going into the shell to remove the files in the config/vchassis folder, but I'm having no luck. Looking at the config, I'm seeing: root> show configuration <snip> commit { factory-settings { reset-virtual-chassis-configuration; reset-chassis-lcd-menu; <snip> root> Which isn't on a factory default system, but I can't seem to clear that portion of the configuration, and I when I delete the .conf files from the shell, the commit/factory-settings/reset-vc stuff pops up all over again. This is probably a really simple thing, but I'm not getting it. Can anyone help? Thanks much. --Dave Peters _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp