Oh also... request virtual-chassis recycle member-id N for old member IDs On Fri, Nov 13, 2015 at 10:08 AM, Michael Loftis <mlof...@wgops.com> wrote: > It might be it's in split mode? request virtual-chassis reactivate ? > It's odd that it shows itself as a linecard but also master role. The > other thing you could do is maybe explicitly set it as a routing > engine? in config set virtual-chassis member 0 serial-number XXX role > routing-engine > > Whatever is going on is just software having to do with it previously > being in a line card role. > > On Fri, Nov 13, 2015 at 9:38 AM, Dave Peters - Terabit Systems > <d...@terabitsystems.com> wrote: >> That's another weird part. It's not connected to anything, and there's no >> vc-port recognized: >> >> root> show virtual-chassis >> >> Virtual Chassis ID: 1517.c443.48e0 >> Virtual Chassis Mode: Enabled >> Mstr Mixed Route >> Neigh >> bor List >> Member ID Status Serial No Model prio Role Mode Mode >> ID I >> nterface >> 0 (FPC 0) Prsnt TR0214440089 qfx5100-48c-6q 128 Master* N VC >> >> Member ID for next new member: 1 (FPC 1) >> >> {linecard:0} >> root> show virtual-chassis vc-port >> fpc0: >> -------------------------------------------------------------------------- >> >> {linecard:0} >> root> >> >> I think I've got a lemon, here, but as always, I really appreciate >> everyone's input. >> >> Thanks much. >> >> --Dave Peters >> >> -----Original Message----- >> From: Alexandre Guimaraes [mailto:alexandre.guimar...@ascenty.com] >> Sent: Friday, November 13, 2015 8:22 AM >> To: Dave Peters - Terabit Systems; juniper-nsp@puck.nether.net >> Subject: RES: VC on a QFX5100 won't go away >> >>> show virtual-chassis >> >> Preprovisioned Virtual Chassis >> Virtual Chassis ID: cf12.a99f.e63b >> Virtual Chassis Mode: Enabled >> Mstr Mixed Route >> Neighbor List >> Member ID Status Serial No Model prio Role Mode Mode >> ID Interface >> 0 (FPC 0) Prsnt TA3714071234 qfx5100-48s-6q 129 Master* N VC 2 >> vcp-255/0/50 >> >> 1 vcp-255/0/51 >> 1 (FPC 1) Prsnt TA3714141234 qfx5100-48s-6q 129 Backup N VC 0 >> vcp-255/0/50 >> >> 2 vcp-255/0/51 >> 2 (FPC 2) Prsnt TA3714141234 qfx5100-48s-6q 0 Linecard N VC 1 >> vcp-255/0/50 >> >> 0 vcp-255/0/51 >> >> >> See vcp-255/0/51 ports: >> >>> show virtual-chassis vc-port >> fpc0: >> -------------------------------------------------------------------------- >> Interface Type Trunk Status Speed Neighbor >> or ID (mbps) ID Interface >> PIC / Port >> 0/50 Configured -1 Up 40000 2 >> vcp-255/0/51 >> 0/51 Configured -1 Up 40000 1 >> vcp-255/0/50 >> >> fpc1: >> -------------------------------------------------------------------------- >> Interface Type Trunk Status Speed Neighbor >> or ID (mbps) ID Interface >> PIC / Port >> 0/50 Configured -1 Up 40000 0 >> vcp-255/0/51 >> 0/51 Configured -1 Up 40000 2 >> vcp-255/0/50 >> >> fpc2: >> -------------------------------------------------------------------------- >> Interface Type Trunk Status Speed Neighbor >> or ID (mbps) ID Interface >> PIC / Port >> 0/50 Configured -1 Up 40000 1 >> vcp-255/0/51 >> 0/51 Configured -1 Up 40000 0 >> vcp-255/0/50 >> >> >> So: >> >> request virtual-chassis vc-port delete pic-slot X port Y member Z >> >> >> >> >> >> >> >> -----Mensagem original----- >> De: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] Em nome de Dave >> Peters - Terabit Systems Enviada em: quinta-feira, 12 de novembro de 2015 >> 18:05 >> Para: juniper-nsp@puck.nether.net >> Assunto: [j-nsp] VC on a QFX5100 won't go away >> >> Hi all-- >> >> I've been trying to remove the VC config from a QFX5100 running 13.2X51-D38, >> and I'm not having any luck. I've tried zeroizing and going into the shell >> to remove the files in the config/vchassis folder, but I'm having no luck. >> Looking at the config, I'm seeing: >> >> root> show configuration >> >> <snip> >> commit { >> factory-settings { >> reset-virtual-chassis-configuration; >> reset-chassis-lcd-menu; >> <snip> >> >> root> >> >> Which isn't on a factory default system, but I can't seem to clear that >> portion of the configuration, and I when I delete the .conf files from the >> shell, the commit/factory-settings/reset-vc stuff pops up all over again. >> >> This is probably a really simple thing, but I'm not getting it. Can anyone >> help? >> >> Thanks much. >> >> --Dave Peters >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > -- > > "Genius might be described as a supreme capacity for getting its possessors > into trouble of all kinds." > -- Samuel Butler
-- "Genius might be described as a supreme capacity for getting its possessors into trouble of all kinds." -- Samuel Butler _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp