Dave, Unfortunately, it looks like GRE support didn't get implemented on the EX4500 until Junos 13.2X50-D15.
http://pathfinder.juniper.net/ is a handy tool for finding out what will and won't work on a hardware platform/Junos version combination. In this case: http://pathfinder.juniper.net/feature-explorer/feature-info.html?fKey=4026&fn=IPv4+over+generic+routing+encapsulation+(GRE)+tunnels%E2%80%94encapsulation+support Cheers, Tony On 21 January 2016 at 10:51, Dave Peters - Terabit Systems < d...@terabitsystems.com> wrote: > Hey everyone-- > > I'm trying to set up a GRE tunnel on an EX4500 running 12.3R9.4, and I'm > running into some basic trouble. This page does a pretty basic setup: > http://www.juniper.net/documentation/en_US/junos15.1/topics/task/configuration/gre-tunnel-services-cli.html > > But when I start to issue this command : > #set chassis fpc 0 pic 0 tunnel-port port-number tunnel-services > > I don't get the "tunnel-port" option. It's not available, per the below: > > root# set chassis fpc 0 pic 0 ? > Possible completions: > + apply-groups Groups from which to inherit configuration data > + apply-groups-except Don't inherit configuration data from these groups > no-multi-rate Disable multi-rate mode > > q-pic-large-buffer Run in large delay buffer mode > > sfpplus Sfpplus configuration option > {master:0}[edit] > root# set chassis fpc 0 pic 0 > > Clearly I'm doing something wrong. Can anyone point me in the right > direction? Google is failing me (or I'm failing Google, which is probably > closer to the truth). > > Thanks much. > > --Dave Peters > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp