Are you going to receive full routing ? Maybe mx104 could be better ... 4GB dram ( important ) with better RE 1.83GHz I think ... ppc ( redundant RE optional)
Buy mx104 with 4 sfp+ onboad ports and buy mic modules Same specs i think ... 80 gbps with 55 mpps But you can populate with 4 x mics ( 2 x XFP each ) and have 12 x 10gbps Lighter and smaller router Only for mpls transport maybe acx5048 would be better too of qfx5100 for L2 only > On Apr 16, 2016, at 13:30, Satish Patel <satish....@gmail.com> wrote: > > My requirement is 10G fiber link terminate on router but in future we > can go with 20G link so should i consider MX80 or MX40 (cost wise > also) > > If we buy MX80 so in base model it comes with 4x10G fiber ports right? > or do i need to buy them separately after buying MX80 chassis? > > Additionally do i need to buy license separately to activate 10G port? > because in Cisco ASR1000 chassis you need to buy fiber module > extension, plue Activation license.. Very costly.. > > > I have check some website they are also selling refurbished or used > which which in good deal should i think about that because buying to > MX80 for hardware redundancy will almost bankrupt us ;) > > what do you suggest? > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp