Tim, Do you use IP Infusion software today? I have never heard of them, but I like the software feature set I see on their website with MPLS and MEF features. However, I doubt the white box plus their software will be any less than the Juniper solution, but I could be surprised.
On Tue, May 10, 2016 at 8:46 AM, Tim Jackson <jackson....@gmail.com> wrote: > You might be able to buy some off the shelf (E.g. Acton or quanta etc) > white box Trident 2 box and look IP Infusion for an OS on it. It may be > cost competitive and have almost all of the features.. > On May 10, 2016 8:31 AM, "Colton Conor" <colton.co...@gmail.com> wrote: > >> Aaron, >> >> Just wondering if you company compared any other products from other >> vendors against the ACX5048? Is there anything else on the market with >> this >> high of port count, for this low of a price, with this amount of features? >> >> On Mon, May 9, 2016 at 11:52 AM, Aaron <aar...@gvtc.com> wrote: >> >> > Thanks Raphael, >> > >> > My core links are untagged typically... in rare case I'll tag, and it >> > doesn't seem to be a problem, I haven't done that on acx5048 yet >> > >> > Ok I did MEF EPL (eline port based carrying any and all vlans, tagged >> and >> > untagged...) works. I shut and deactivate core bgp for this test to >> prove >> > that it's purely igp, mpls, ldp to make it work. Ce-ce pings and >> > l2protocols seem to be fine ( I tested cdp and stp for CE to CE and it's >> > fine )...of course the config's below are the MPLS PE's... the ce's I >> > mention are not shown anywhere here. >> > >> > >> > ---3600 >> > >> > interface GigabitEthernet0/15 >> > >> > switchport trunk allowed vlan none >> > >> > switchport mode trunk >> > >> > load-interval 30 >> > >> > service instance 1 ethernet >> > >> > encapsulation default >> > >> > l2protocol forward >> > >> > xconnect 10.101.12.245 999 encapsulation mpls >> > >> > --- ACX5048 >> > >> > set protocols l2circuit neighbor 10.101.12.251 interface ge-0/0/38.0 >> > virtual-circuit-id 999 >> > >> > set interfaces ge-0/0/38 encapsulation ethernet-ccc >> > >> > set interfaces ge-0/0/38 unit 0 family ccc >> > >> > - Aaron >> > >> > >> > _______________________________________________ >> > juniper-nsp mailing list juniper-nsp@puck.nether.net >> > https://puck.nether.net/mailman/listinfo/juniper-nsp >> > >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp