Can you share the interface config and are the switches configured for LACP ?
On 17 August 2016 at 23:19, Jeffrey Nikoletich <je...@xfernet.com> wrote: > Hello, > > We have a SRX we are deploying and are having some issues and some > guidance would be great. We have a SRX 3600 and want to deploy in the > following manner: > > It is connected via 2 Dell S55 External switches. 1 10G drop per switch. > We will call that subnet 1.1.1.0/24. > > On the Internal side. It is connected to 6 x Dell S55 switches. 1 10G drop > per switch. We will call that 10.0.0.0/24. > > For the internal, I setup a AE interface that has all 6 x 10G ports in it. > External has an AE interface as well. External is AE0 and internal is AE1. > > The issue I am have was it seems that the AE interfaces were only passing > traffic via a single interface? Any reason why? > > Also does this setup look "sane" just wanted some feedback as this is our > first SRX deployment. > > Thanks in advance. > > Regards, > > Jeffrey Nikoletich - Chief Information Officer | 213-201-6080 > > Xfernet > | 1-855-XFERNETPh 213-201-6080 | http://www.xfernet.net > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp