> I$,1ry(Bm trying to wrap my head around MPLS and have built a small lab. I > understand how provider routers label switch packets and how provider edges > use VRF instances and their distinguishers and targets to address each other. > Per the Juniper examples I have LDP and RSVP enabled on all the transit > interfaces along with MPLS and obviously the correct interface families > (MPLS) attached to the same transit interfaces.
Are you sure you need RSVP and bandwidth reservation? If you can do without this, a basic MPLS network with LDP but without RSVP is quite a bit easier to build and understand. Steinar Haug, Nethelp consulting, sth...@nethelp.no
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
