Hi there, To your questions, I´ve been using EX series switchs for over 2 years now:
1. Configuring firewall gives me "Warning: statement ignored: unsupported platform (ex4550-32f)" when including "except". I'm trying to filter ALL traffic except from some IP but except is not working. Indeed; "except" does not work, therefore you have to reconfigure your filter in order to do the same thing; 2. All the box have 13.2X51-D35.3 (Junos 13.2??) but juniper site says 12.3R12 is suggested as of the moment. JunOS 15 and 16 is available for the box (I think) but I am not sure what to follow. The 12.3R12 is recommended also for EX2200 and EX4200; always follow Juniper´s recommendations! The table of recommended versions is available on the website juniper.net Ref.: https://kb.juniper.net/InfoCenter/index?page=content&id=KB21476&actp=search 3. Not really technical but if someone can help. I just signed up for an account on their site so I can download checkout the firmware(s) but I haven't got a response from them. Juniper are a bit slow in responding on EX issues, but this forum has been helpful to me so far. Good luck. Lucio _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
