Hello,
Have You tried to duplicate Your LS IP on master system lo0.0, and
explicitly set "source-address" for each LS-mapped Jflow instance to be
one of these duplicated IPs?
if You worry about leaking these IP to Your IGP, then JUNOS has tools to
selectively disallow lo0.0 IP into IGP.
Thanks
Alex
On 23/11/2016 11:51, Epafras R Schaden wrote:
Hello All,
We have an MX480 configured to export IPFIX flows to a server. Now, we have
created some Logical Systems on the router to provide something like a “virtual
router” to some of our customers on this location.
I have now configured some of those instances to export flows to the same flow
server, but the objective is to monitor each logical system as a different
router. But, I realized that all flows are going with the same “source router”
and is the master instance source address, as explained in the documentation
bellow:
https://kb.juniper.net/InfoCenter/index?page=content&id=KB27035&actp=search#oVDDK8SlxYPs227b.97
http://www.juniper.net/documentation/en_US/junos16.1/topics/example/active-monitoring-on-logical-systems-configuring.html
The question is, has anyone had this claim yet? Is there any way to configure
the router to send the flows with different source addresses per logical system?
Any help will be appreciated.
Thanks
Epafras Schaden
Sunnyvale Networks.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
